General inquiries


Sales & Support


Service hours (CET)

Fritz Kübler GmbH

Monday - Thursday: 7.30 am to 5.00 pm
Friday: 7.30 am to 4.00 pm

 573T  573T  573T  573T  573T
 573T  573T  573T  573T  573T

Process controllers for standard signals electronic

573T

  • Tare function
  • 4 switching and/or 2 relay outputs and RS232 interface
  • Up to 3 display values in one device
  • Dimension
    · 96 x 48 mm | 92 x 45 mm
  • Power supply:
      · 115 V AC
      · 230 V AC
      · 18...30 V DC
  • Display 8-digit number, LCD Touchscreen
Analog ±10 V
RS232
RS485
Modbus
IO-Link

Touch process controller with 2 analog inputs.

The process control unit with 2 analog inputs can be used in both single-channel and dual-channel operation. For two-channel operation, all arithmetic operations are available to display the sum, difference, ratio or product. Inputs and outputs are separately scalable.
Can be used as a simple process converter, process control unit (2 point controllers) or for complex measuring tasks in which 2 values are to be monitored, calculated or further processed in a higher-level control system.

Mechanical
Model Dual-function device electronic
Functions Process controllers for standard signals
Standard signal measuring devices
Process displays for standard signals
Dimension 1 96 x 48 mm | 92 x 45 mm
Protection level IP20
IP65
Working temperature -20 °C ... +60 °C
Weight 200 g
Reset electronic

(1) Front panel size | Panel cut-out
Electrical
Power supply 115 V AC
230 V AC
18...30 V DC
Signal input Analog ±10 V
Analog 0...20 mA
Analog 4–20 mA
PNP
Signal output Analog ±10 V
Analog 0...20 mA
Analog 4–20 mA
RS232
RS485
2 x Relais
4 x PNP
Interfaces Modbus
IO-Link
Printer CR/LF
Drivecom DIN ISO 1745

573T LCD touch multifunction preset counters

Properties
  • 2 separate freely scalable analog inputs ±10 V and 0/4 to 20 mA, resolution 16 bit.
  • Tare function, the device can be set to 0 at any input voltage.
  • Programmable linearization With up to 24 support points, input via keyboard or by means of the teach function.
  • Mean value measurement programmable from 2 to 16 measuring cycles, with strongly fluctuating input signals.
  • Simple programming by entering the desired display value for a defined input signal.
  • Fast measuring rate of 25 ms per channel alternating.
  • RS232 or RS485 serial interface for reading and writing data.
  • Total sum counter for single and total values – time-controlled or manually controlled.
  • Optional IO-Link input/output interface with Device 1.1 protocol.

Benefits
  • Up to 3 display values in one device, display A, display B, calculated display from A and B.
  • AC and DC supply voltage in one device.
  • Simple plain text programming via touch display and separate tare or teach function.
  • Can be used as a simple process converter, process control unit (2 point controllers) or for complex measuring tasks in which 2 values are to be monitored, calculated or further processed in a higher-level control system.
  • Mathematical linking of the measured values of input A and B. The result can also be multiplied, divided or added to an offset value to obtain the desired display value.
  • Analog output 0/4 to 20 mA, or ±10 V.
  • 4 fast PNP switching outputs, 50 ms, with switching hysteresis, step or drag preset.
  • Programmable display update.
Data sheet

573T

PDF ∼ 1,4 MB | 03.2024
DE
EN
FR
Operation Manual

573T IO-Link

PDF ∼ 2,9 MB | 02.2023
DE
EN
FR

570T, 571T, 573T Modbus

PDF ∼ 147,6 KB | 07.2018
DE
EN
FR

OS10 - Standard software

PDF ∼ 5,4 MB | 07.2024
DE
EN
Manual

57x/SK RS232 RS485 SERPRO Serial communication protocol

Multilingual: German, English
PDF ∼ 342,2 KB | 11.2018

Declaration of conformity

570T 571T 573T CE

Multilingual: German, English, French
PDF ∼ 107,5 KB | 04.2022

Device file

573T / 573T IO-Link - IODD v1.1

ZIP ∼ 94,7 KB | 10.2020

Software

Standard + SafeConfig OS10

Multilingual: German, English, French
ZIP ∼ 69,3 MB | 05.2024

Mechanical CAD / STEP

57xT

ZIP ∼ 5,5 MB | 06.2019

Electronic CAD / ePlan

573T

ZIP ∼ 1,6 MB | 03.2021

Accessories

Mounting frame, 48x96

Mounting frame, 48x96

For the installation of all devices with DIN dimensions 48x96mm. For mounting the devices on a DIN rail.
G.300.005
Data sheet
Mounting frame
DE EN FR

Cables and connectors

„Do you have technical questions about the Kübler counter or are you looking for individual solutions? We at Application Support are here for you.“

Rainer Grueninger
Application support
Rainer Grueninger
Application Engineer

support@kuebler.com
+49 7720 3903 849

„We will be pleased to give you information about prices and delivery times. We are looking forward to your inquiry.“

Fritz Kübler GmbH
Sales
Fritz Kübler GmbH
Sales Germany

info@kuebler.com
+49 7720 3903 871
+49 7720 21564