Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Encoders Incremental
Sendix 5814
|
|
Highly interpolatable – ideal for drive technology.
The incremental encoders Sendix 5814 and 5834 with SinCos interface are particularly suited for applications in the field of drive technology.
Thanks to their high signal quality, they are optimally suited for further interpolation.
| Mechanical | |
|---|---|
| Dimension | Ø 58 mm |
| Shaft type |
10 mm shaft, with flat surface |
| Flange type |
Clamping flange Ø 58.00 mm |
| Working temperature | -40 °C ... +90 °C |
| Protection level |
IP65 |
| Connection types |
Radial cable Tangential cable M12 connector radial |
| Max. rotational speed |
12.000 min-1 |
| Weight | 450 g |
| Electrical | |
|---|---|
| Scanning | optical |
| Resolution max. |
2.048 ppr incremental |
| Power supply |
5 V DC 10...30 V DC |
| Interfaces |
SinCos |
| Options | |
|---|---|
| on request |
|
Powerful
- With incremental SinCos tracks.
- Very high signal quality.
- Suited for motor feedback applications.
- Shaft and hollow shaft versions.
- Cable and connector variants.
- Various mounting options available.
Accessories
Bellows coupling
Bellows couplings provide cost-effective connection of the motor and encoder. They are also able to correct any angular errors between the drive and encoder. Compensating larger angle displacements.Bellows coupling (stainless steel).
| 8.0000.1202.XXXX |
Assembly bell
For shaft encoders with flange ø 50 ... 58 mmFast encoder mounting. Electrical and thermal insulation through glass-fibre reinforced plastic and insulating spring washer coupling - complete delivery as a set.
Scope of delivery
- Mounting bell
- Spring washer coupling (8.0000.1401.XXXX)
- Mounting eccentric (8.0000.4B00.0000)
- Mounting accessories
| 8.0000.4500.XXYY |
Adapter flange, square, 4 mm
For shaft encoders with clamping flange ø 50 ... 58 mmScope of delivery
- Flange adapter (aluminum)
- 3 screws for fastening to the encoder
Connection to application (not included in delivery)
- 4 screws
| 58,0 mm x 4 mm | 8.0010.2100.0000 |
| 63,5 mm x 3 mm | 8.0010.2120.0000 |
| 70,0 mm x 10 mm | 8.0010.2600.0000 |
| 80,0 mm x 4 mm | 8.0010.2800.0000 |
Flange, Ø 115mm Euroflange
For shaft encoders with flange ø 50 ... 58 mmScope of delivery
- Flange adapter (aluminum)
- 3 screws for fastening to the encoder
Connection to application (not included in delivery)
- 6 screws
| Drehgeber 580x/5000 | 8.0010.2160.0000 |
Flange, Ø 115mm Euroflange
For shaft encoder with flange ø 70 mmScope of delivery
- Flange adapter (aluminum)
- 3 screws for fastening to the encoder
Connection to application (not included in delivery)
- 6 screws
| Drehgeber 70xx | 8.0010.2170.0000 |
Flange, Ø 58mm
For shaft encoders with flange ø 50 ... 58 mm.Adapter for converting a clamping flange into a synchro flange.
Scope of delivery
- Flange adapter (aluminum)
- 3 screws for fastening to the encoder
Connection to application (not included in delivery)
- 3 screws
| 8.0010.2180.0000 |
Flange, Ø 90mm
For shaft encoders with flange ø 50 ... 58 mm.Adapter for converting a clamping flange into a synchro flange. Mechanically compatible with encoder type 9000.
Scope of delivery
- Flange adapter (aluminum)
- 3 screws for fastening to the encoder
Connection to application (not included in delivery)
- 6 screws
| 8.0010.2270.0000 |
Angular flange
For shaft encoders with flange ø 50 ... 58 mmScope of delivery
- Angle flange (aluminium)
- 3 screws for fastening to the encoder.
Connection to the application (not included in delivery)
- 2 screws
| 8.0010.2300.0000 |
Bearing box
For shaft encoder with clamping flange ø 58 mm and shaft 10 x 20 mmWhen the encoder is driven by a toothed or chain wheel, V-belt or toothed belt, impeller, etc., the permissible axial or radial shaft loads are usually exceeded during operation. For these cases, the bearing box equipped with reinforced bearings is ideally suited.
Scope of delivery
- Bearing box with lock and O-ring
- Coupling for shaft 10 mm
- Adapter flange 8.0010.2100.0000
- Mounting accessories
| 8.0010.8200.0004 |
Robust bearing unit
For shaft encoders with clamping flange ø 50 ... 58 mm and shaft 10 mmThe separation of the bearing load and the sensor system provides the encoder with additional protection in harsh environments.
Scope of delivery
- Robust bearing unit
- 3 x cheese head screw M4x25 (SW3)
- 1 x O-ring
| 8.0010.8200.000C |
