Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Encoders Absolute multiturn
Sendix 5888
|
|
For real-time communication: Industrial Ethernet encoders with EtherCAT interface.
The multiturn encoders Sendix 5868 and 5888 with secondgeneration EtherCAT interface and optical sensor technology are ideal for use in all applications with an EtherCAT interface. The data communication is based on CAN over EtherNet and ideally suited for use in real time applications. These encoders are available with a solid shaft up to a maximum of 10 mm or a blind hollow shaft up to 15 mm.
Connectivity stands for the ability to communicate additional information and / or to be integrated in a network. This can take the form of additional interfaces such as OPC-UA (e.g. for additional edge communication) or Industrial Ethernet communication as well as a digital interface such as "BISS" or "SCS open link".
Identification is the ability to transmit technical information by means of an electronic data sheet / type plate. In addition, further information about the machine can be transmitted (e.g. information about the axis where the encoder is installed). Essentially, all the information required in the application for asset management is recorded here.
| Mechanical | |
|---|---|
| Dimension | Ø 58 mm |
| Shaft type |
3/8 " hollow shaft, blind hole 10 mm hollow shaft, blind hole 12 mm hollow shaft, blind hole 14 mm hollow shaft, blind hole 15 mm hollow shaft, blind hole 1/2 " hollow shaft, blind hole |
| Flange type |
Ø 58.00 mm Ø 63.00 mm Ø 65.00 mm Ø 72.00 mm |
| Working temperature | -40 °C ... +80 °C |
| Protection level |
IP65 IP67 |
| Connection types |
M12 connector radial |
| Max. rotational speed |
9.000 min-1 |
| Weight | 570 g |
| Electrical | |
|---|---|
| Scanning | optical |
| Resolution max. |
16 bits singleturn 12 bits multiturn |
| Power supply |
10...30 V DC |
| Interfaces |
EtherCAT |
- EtherCAT conformance tested.
- Integration of the latest slave – EtherCAT stack from Beckhoff, Version 5.01.
- Ideally suited for use in harsh outdoor environments, thanks to IP67 protection and rugged housing construction.
- Use of CoE (CAN over EtherNet).
- Genuine new position information as a result of minimal cycle time of 62.5 μs in the DC mode.
- Faster, easier error-free connection thanks to M12 connectors.
- Supports Hot Connect.
Accessories
Stator coupling
For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 32.5 mm
For lateral mounting on the encoder flange.
For applications with axial and radial play at high dynamics.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 3 screws
| 8.0010.1602.0000 |
Torque stop, flexible
For hollow shaft encoderswith flange ø 58 mm
Mounting radius 39.5 ... 142.75 mm
Designed for functional safety technology.
For applications with axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 M3x6 screws for fastening to the encoder
Connection to application (not included in delivery)
- 1 screw
| 8.0010.4047.00FS |
Fastening arm set, rigid
For hollow shaft encoderswith flange ø 58 mm
Mounting radius 32.5 ... 143.5 mm
Designed for functional safety technology.
For applications with very low axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 M3x6 screws for fastening to the encoder
Connection to application (not included in delivery)
- 1 torque pin 8.0010.4049.0075
| 8.0010.4051.00FS |
Stator coupling (FS)
For hollow shaft encoders
with flange ø 58 mm
Mounting radius 31.5 mm
Designed for functional safety technology by 4-screw principle.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws M3x6 for mounting to the encoder
Connection to application (not included in delivery)
- 4 screws
| 8.0010.40B2.00FS |
Fastening arm, medium (flexible)
For hollow shaft encoderswith flange ø 50 ... 58 mm
Mounting radius 32.5 ... 45.75 mm
For applications with axial and radial play with constant rotary movements.
Scope of delivery
- Torque support (stainless steel)
- 3 screws for fastening to the encoder
Connection to application (not included in delivery)
- 1 screw
| 8.0010.40E0.0000 |
Stator coupling
For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 32.5 mm
For lateral mounting on the encoder flange.
For applications with axial and radial play at high dynamics.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 3 screws
| 8.0010.40L0.0000 |
Fastening arm, short (flexible)
For hollow shaft encoderswith flange ø 50 ... 58 mm
Mounting radius 32.25 mm
For applications with axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 screws for fastening to the encoder
Connection to application (not included in delivery)
- 1 screw
| 8.0010.40M0.0000 |
Spring tether element
For hollow shaft encoderswith flange ø 50 ... 58 mm
For applications with low radial and axial play and low dynamics.
Scope of delivery
- Wire spring element
- 1 screw for fastening to the encoder.
Connection to application (not included in delivery)
- 1 screw
| 8.0010.40W0.0000 |
Stator coupling, double-winged
For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 31.5 mm
For lateral mounting on the encoder flange. For applications with high accuracy requirements.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 2 screws
| 8.0010.4D00.0000 |
Spring element, short
For hollow shaft encoderswith flange ø 36 ... 58 mm
Mounting radius 16 ... 27 mm
For applications with limited axial clearance at low dynamics and limited installation space.
Scope of delivery
- Spring element (plastic)
- 1 screw for fastening to the encoder
Connection to application (not included in delivery)
- Parallel pin 8.0010.4700.0000
| 8.0010.4H00.0000 |
Spring element, long
For hollow shaft encoderswith flange ø 36 ... 58 mm
Mounting radius 30.7 ... 36.7 mm
For applications with high axial backlash, at low dynamics.
Scope of delivery
- Spring element (plastic)
- 1 screw for fastening to the encoder
Connection to application (not included in delivery)
- Parallel pin 8.0010.4700.0000
| 8.0010.4I00.0000 |
Fastening arm, long, (flexible)
For hollow shaft encoderswith flange ø 50 ... 58 mm
Mounting radius 36.5 ... 85 mm
For applications with axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 screws for fastening to the encoder
Connection to application (not included in delivery)
- 1 screw
| 8.0010.4R00.0000 |
