Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Encoders Absolute multiturn
Sendix S5888FS3
|
|
Safe Sendix Encoders with FSoE interface and cyber security
The optical absolute Sendix S58 FSoE encoders are based on the new Kübler Industrial Ethernet encoder platform and are therefore already designed today for future Industry 4.0 concepts. As certified SIL3/PLe encoders with redundant design and EtherCAT interface, they support the FSoE profile and are predestined for safety applications.Highlight: The safe Sendix encoders are equipped with cyber security.
Connectivity stands for the ability to communicate additional information and / or to be integrated in a network. This can take the form of additional interfaces such as OPC-UA (e.g. for additional edge communication) or Industrial Ethernet communication as well as a digital interface such as "BISS" or "SCS open link".
Identification is the ability to transmit technical information by means of an electronic data sheet / type plate. In addition, further information about the machine can be transmitted (e.g. information about the axis where the encoder is installed). Essentially, all the information required in the application for asset management is recorded here.
Diagnostics functions provide relevant information about the condition of the product (e.g. error messages) or indirect information about the application. For example, an integrated temperature sensor can indicate that the permissible working temperature range has been exceeded. Or integrated vibration sensors provide information on the condition of the power train bearings. Highly integrated bearingless systems in particular can provide reliable information here. Log and time stamp functions in Industrial Ethernet encoders make it possible to create lifetime histograms.
Adaptability refers to adaptability, which can take place on two levels:
- At the operational level, the parameters / settings of an encoder can be changed during operation, e.g. to optimize setup processes or to eliminate measurement errors with digital signal processing.
- Software updates can be carried out at system level at any time.
The range of functions for the implementation of Industry 4.0 / IIoT concepts can be subsequently extended in order to guarantee the future viability of the system. Therefore, all Kübler fieldbus and Industrial Ethernet encoders are available with a firmware update function as standard.
| Mechanical | |
|---|---|
| Dimension | Ø 58 mm |
| Shaft type |
3/8 " hollow shaft, blind hole 10 mm hollow shaft, blind hole 12 mm hollow shaft, blind hole 14 mm hollow shaft, blind hole 15 mm hollow shaft, blind hole 1/2 " hollow shaft, blind hole |
| Flange type |
Stator coupling FS Torque bracket FS, fixed Torque bracket FS, flexible Ø 58.00 mm |
| Working temperature | -40 °C ... +80 °C |
| Protection level |
IP65 IP67 |
| Connection types |
M12 connector axial |
| Max. rotational speed |
9.000 min-1 |
| Weight | 450 g |
| Electrical | |
|---|---|
| Scanning | optical |
| Resolution max. |
24 bits singleturn 12 bits multiturn |
| Power supply |
10...30 V DC |
| Interfaces |
Safety over EtherCAT / FSoE |
| Options | |
|---|---|
| on request |
|
- Sturdy bearing construction in Safety-Lock™ Design for resistance against vibration and installation errors.
- Singleturn 15 bit (safe) or 24 bit (non safe).
- Multiturn 12 bit (safe).
- SIL3, performance level Ple, safety category Cat. 3.
- Fully redundant multiturn information due to redundant multiturn gearbox.
- Transmission via safety telegrams 36/37, according to BP and XP.
- FoE (File over EtherCAT) without required web server.
- Cyber Security / high system availability, protection against misuse (in accordance with IEC 62443).
- Modular Device Profile enables integration into applications with different requirements..
- Can be implemented in networks for hard real-time requirements with clock cycles of up to 125 μs (non-safe) thanks to DC mode support.
- Ideal for highly synchronous applications, such as axis synchronization.
- Equipped for a wide range of applications thanks to versatile encoder functions such as transmission factors (safe/non-safe) or limit value switches etc.
Accessories
Bellows couplings (FS)
Bellows couplings are used for the low backlash connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved.These bellows couplings (FS) provide a safe connection between the application and Sendix SIL encoders.
The safety-oriented bellows coupling has, in addition to the metallic bellows, internal claws that ensure the driving of the encoder in case of breakage of the bellows connection.
Variants - for shaft diameter d1/d2 in mm
10/10 - 10/12
| 8.0000.15FS.XXXX |
