Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Multifunction devices electronic
Codix 524
|
|
Multifunction counter – up to 4 functions in one device.
The Codix 524 is a power-supplied multifunction counter with 4 functions in one device:Pulse and position display, frequency and speed display, time counter and short time meter for fast and slow counting pulses. With 6-digit LED display for NPN, PNP input signals.
| Mechanical | |
|---|---|
| Model | Multifunction device electronic |
| Functions |
Pulse counter Frequency display Position displays without limit values Tachometer without limitvalues Hour meters / timers Short-time meter |
| Dimension 1 |
48 x 24 mm | 45 x 22 mm |
| Protection level |
IP65 |
| Working temperature | -20 °C ... +65 °C |
| Weight | 50 g |
| Reset |
electronic |
(1) Front panel size | Panel cut-out
| Electrical | |
|---|---|
| Power supply |
10...30 V DC |
| Signal input |
NPN PNP |
Powerful
User-friendly and universal
- Fast counter and frequency input, input frequency max. 60 kHz
- Robust housing - IP65 protected
- Very bright LED display, 8 mm high, 6 digits
- Exact and high-precision frequency measurement method (HRA-High Rate Accuracy System)
Frequencies up to 38 Hz are measured by a period duration measurement are evaluated. Frequencies > 38 Hz are controlled via a special
Gate time measurement evaluated.
Despite a short gate time, a very high accuracy of < 0.1% achieved. The measurement result is available after max. 50 ms.
- Short start-up time - Detected after power supply is switched on incoming pulses already after 16 ms => none Pulse loss with simultaneous motor start
User-friendly and universal
- Large keys (can also be operated with gloves)
- Programming:
- Simple and uniform programming and operation by plain text programming.
- Access to programming also during operation with safety prompt
- Individually adjustable scaling
Multiplication and division factor (0.0001 to 99.9999), in order to calculate corresponding units in e.g. position in 1/10 mm and speed to be displayed in /RPM - 4 different counter input types for the position display: Counting direction, difference or addition mode, phase discriminator with single, double, or quadruple evaluation
- Frequency measurement (display in 1/min or 1/sec)
- Time counting: Pulse width or period duration measurement in hours, minutes or seconds, as well as real-time display
- Inputs: As an alternative to the HTL inputs, the following devices are also available with 4 to 30 V DC input level for use as a parallel display for PLC
- Optional with output: 0 signal for position and counting, Standstill monitoring at speed, 1 Hz cycle during active timing
Accessories
Sealing cover K1
Flexible sealing cap for front frame F1B and adapter front frame N003001 made of soft PVC with painted sheet steel frame and mounting screws. IP65 protection according to DIN 40050 when installed. Suitable for B15.31, B16.31, B16.30, B18.30, F1B15.01, F1B16.01, F1B16.00 and F1B18.00. With adapter frame N.003.001 for 130, 131, 132, 133, 134, 135, 136, 140, 141, 142, 143, 520, 521, 522, 523, 524, 52U, 52P, 52T.Sealing cap (PVC) with sheet steel frame, 2 mounting screws M4x15.
| Grau | G.008.300 |
| Schwarz | G.008.301 |
Mounting frame, 24x48
For the installation of all counters, timers, process devices with DIN dimensions 24x48mm or 50x25mm. Cutout 25x50mm. For snap-on mounting on 35mm DIN top hat rail.Meter holder (chrome-plated sheet steel), DIN hat-rail adapter (fiber-reinforced polyamide).
| G.300.004 |
Transparent cover, lockable
Screw-on transparent cover for front frame F1B and adapter front frame N003001, 1 DV, lockable for dimension F1. With seal over M4 mounting screws with own frame. Suitable for B15.31, B16.31, B16.30, B18.30, F1B15.01, F1B16.01, F1B16.00 and F1B18.00. With adapter frame N.003.001 for 130, 131, 132, 133, 134, 135, 136, 140, 141, 142, 143, 520, 521, 522, 523, 524, 52U, 52P, 52T.Transparent cover, seal, 2 mounting screws.
| N.003.002 |
