Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Pulse counter electronic
Codix 541
|
|
Pulse counter, double-channel with 6 types of counter inputs, freely scalable.
The Codix 541 is a voltage supplied pulse / counter position indicator with counter input types: Counting direction, difference, addition, phase discriminator mode with single, double, quadruple evaluation for fast and slow counting pulses, with 6-digit LED display for NPN, PNP input signals.| Mechanical | |
|---|---|
| Model | electronic |
| Function |
Position displays without limit values |
| Dimension 1 |
96 x 48 mm | 92 x 45 mm |
| Protection level |
IP65 |
| Working temperature | -20 °C ... +65 °C |
| Weight | 150 g |
| Reset |
electronic |
(1) Front panel size | Panel cut-out
| Electrical | |
|---|---|
| Power supply |
100...240 (± 10%) V AC 10...30 V DC |
| Signal input |
NPN PNP |
Powerful
- Fast counting input - input frequency of max. 60 kHz.
- Robust housing - IP65 protected.
- Very bright LED display, 14 mm high.
- Position, difference, summing or counting direction detection:
- Programmable for positive (PNP) or OV (NPN) switching input pulses.
- Fast counter input with an input frequency of max. 60 kHz for mechanical contacts to be attenuated to 30 Hz.
- Short start-up time: Detects incoming pulses already after 16 ms after switching on the power supply => no pulse loss with simultaneous motor start.
- Large buttons - can also be operated with gloves.
- Simple and uniform programming and operation through plain text programming - Access to programming even during operation with safety query.
- Individually adjustable scaling Multiplication and division factor (0.0001 to 99.9999) to represent corresponding units in e.g. position in 1/10 mm or packaging units.
- 4 counter input types: 2-channel input for acquisition of counting direction, differential or addition mode, phase discriminator with single, double, or quadruple evaluation.
- Freely programmable set value.
- AC or DC supply, with sensor voltage supply.
- As an alternative to the HTL inputs, devices with 4 to 30 V DC input level available for use as parallel display to PLC.
- Optionally with output as zero signal.
