General inquiries


Sales & Support


Service hours (CET)

Fritz Kübler GmbH

Monday - Thursday: 7.30 am to 5.00 pm
Friday: 7.30 am to 4.00 pm

Sendix 5858 Sendix 5858
Sendix 5858 Sendix 5858

Encoders Absolute singleturn

Sendix 5858

  • Particularly resistant
  • Reliable
  • Latest encoder profile
  • Dimension Ø 58 mm
  • 16 bits singleturn
  • Max 10 mm shaft, with flat surface
  • Max 3/8" shaft, with flat surface
PROFIBUS DP

For field bus communication: Encoders with PROFIBUS DP interface.

The absolute encoders Singleturn Sendix 5858 / 5878 with PROFIBUS DP interface and optical sensors are the right solution for all Profibus applications. Distributed over 360°, the maximum resolution is 16 bits. These encoders are available with blind hollow shafts up to 15 mm.

Mechanical
Dimension Ø 58 mm
Shaft type 6 mm shaft, with flat surface
10 mm shaft, with flat surface
1/4 " shaft, with flat surface
3/8 " shaft, with flat surface
Flange type Synchro flange / Servo flange
Clamping flange
Square flange

Ø 58.00 mm
❏ 63,50 mm
Working temperature -40 °C ... +80 °C
Protection level IP65
IP67
Connection types M12 connector radial
Terminal box
Max. rotational speed 9.000 min-1
Weight 530 g
Electrical
Scanning optical
Resolution max. 16 bits singleturn
Power supply 10...30 V DC
Interfaces PROFIBUS DP
Reliable
  • Proven use in applications with the highest demands such as wind power or mobile automation.
  • IP67 protection and a wide temperature range from -40°C to +80°C make it particularly suitable for outdoor use.
Flexible
  • Fast, simple, error-free connection thanks to variant with M12 plug.
  • Extensive programming possibilities by using the latest encoder profile.
Data sheet

Sendix 5858 / 5878 PROFIBUS

PDF ∼ 925,6 KB | 07.2024
DE
EN
FR
Operation Manual

Operation manual for encoders

Multilingual: German, English, French
PDF ∼ 2,9 MB | 09.2022

Operating manual for encoders with ATEX 2/22

Multilingual: German, English, French, Italian, Spanish
PDF ∼ 3,6 MB | 05.2023

Manual

Encoder with PROFIBUS interface

PDF ∼ 3,3 MB | 09.2020
DE
EN
Safety characteristics

Sendix 5858 MTTFd

Multilingual: German, English
PDF ∼ 185,5 KB | 06.2019

Declaration of conformity

Sendix 5858 / 5878 CE

Multilingual: German, English, French
PDF ∼ 387,0 KB | 04.2016

Device file

Sendix 58x8 PROFIBUS

ZIP ∼ 35,8 KB | 08.2017

Mechanical CAD / STEP

Sendix 5858

ZIP ∼ 7,4 MB | 01.2022

Electronic CAD / ePlan

Sendix 5858 / 5878 PROFIBUS DP

ZIP ∼ 6,2 MB | 02.2020

Product Certificates

Encoder UL USA

PDF ∼ 78,2 KB | 11.2019
EN

Salt spray test ManufacturersDeclaration

PDF ∼ 39,6 KB | 05.2023
DE
EN

Encoder UL Canada

PDF ∼ 79,9 KB | 11.2019
EN

Accessories

Bellows coupling

Bellows coupling

Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.

Bellows coupling (stainless steel).
8.0000.1202.XXXX
Data sheet
Bellows and spring washer couplings
DE EN FR
Mechanical CAD / STEP
8.0000.1202.XXXX

Assembly bell

Assembly bell

For shaft encoders with flange ø 50 ... 58 mm
Fast encoder mounting. Electrical and thermal insulation through glass-fibre reinforced plastic and insulating spring washer coupling - complete delivery as a set.

Scope of delivery
- Mounting bell
- Spring washer coupling (8.0000.1401.XXXX)
- Mounting eccentric (8.0000.4B00.0000)
- Mounting accessories
8.0000.4500.XXYY
Data sheet
Accessories shaft encoders
DE EN FR
Mechanical CAD / STEP
8.0000.4500.XXXX

Adapter flange, square, 4 mm

Adapter flange, square, 4 mm

For shaft encoders with clamping flange ø 50 ... 58 mm

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 4 screws
58,0 mm x 4 mm 8.0010.2100.0000
63,5 mm x 3 mm 8.0010.2120.0000
70,0 mm x 10 mm 8.0010.2600.0000
80,0 mm x 4 mm 8.0010.2800.0000
Data sheet
Accessories shaft encoders
DE EN FR
Mechanical CAD / STEP
8.0010.2100.0000

Flange, Ø 115mm Euroflange

Flange, Ø 115mm Euroflange

For shaft encoders with flange ø 50 ... 58 mm

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for fastening to the encoder

Connection to the application (not included in delivery)
- 6 screws
Drehgeber 580x/5000 8.0010.2160.0000
Data sheet
Accessories shaft encoders
DE EN FR
Mechanical CAD / STEP
8.0010.2160.0000

Flange, Ø 58mm

Flange, Ø 58mm

For shaft encoders with flange ø 50 ... 58 mm
Adapter for converting a clamping flange into a synchro flange.

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 3 screws
8.0010.2180.0000
Data sheet
Accessories shaft encoders
DE EN FR
Mechanical CAD / STEP
8.0010.2180.0000 Accessories flange / CAD

Flange, Ø 65mm

Flange, Ø 65mm

For shaft encoders with flange ø 50 ... 58 mm
With this flange adapter, Kübler encoders of size 58 mm can replace third-party encoders of size 65 mm.

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 3 screws
8.0010.2230.0000
Data sheet
Accessories shaft encoders
DE EN FR
Mechanical CAD / STEP
8.0010.2230.0000

Flange, Ø 90mm

Flange, Ø 90mm

For shaft encoders with flange ø 50 ... 58 mm
Adapter for converting a clamping flange into a synchro flange. Mechanically compatible with encoder type 9000.

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for fastening to the encoder

Connection to the application (not included in delivery)
- 6 screws
8.0010.2270.0000
Data sheet
Accessories shaft encoders
DE EN FR
Mechanical CAD / STEP
8.0010.2270.0000

Angular flange

Angular flange

For shaft encoders with flange ø 50 ... 58 mm

Scope of delivery
- Angle flange (aluminium)
- 3 screws for fastening to the encoder.

Connection to the application (not included in delivery)
- 2 screws
8.0010.2300.0000
Data sheet
Accessories shaft encoders
DE EN FR
Mechanical CAD / STEP
8.0010.2300.0000

Fastening eccentrics

Fastening eccentrics

For shaft encoders with synchro flange ø 50 ... 70 mm

Scope of delivery
- 3 eccentric
- 3 screws
8.0010.4100.0000
Data sheet
Accessories shaft encoders
DE EN FR
Mechanical CAD / STEP
8.0010.4100.0000

Bearing box

Bearing box

For shaft encoder with clamping flange ø 58 mm and shaft 10 x 20 mm
When the encoder is driven by a toothed or chain wheel, V-belt or toothed belt, impeller, etc., the permissible axial or radial shaft loads are usually exceeded during operation. For these cases, the bearing box equipped with reinforced bearings is ideally suited.

Scope of delivery
  • Bearing box with lock and O-ring
  • Coupling for shaft 10 mm
  • Adapter flange 8.0010.2100.0000
  • Mounting accessories
8.0010.8200.0004
Data sheet
Bearing box
DE EN FR

Robust bearing unit

Robust bearing unit

For shaft encoders with clamping flange ø 50 ... 58 mm and shaft 10 mm
The separation of the bearing load and the sensor system provides the encoder with additional protection in harsh environments.

Scope of delivery
  • Robust bearing unit
  • 3 x cheese head screw M4x25 (SW3)
  • 1 x O-ring
8.0010.8200.000C
Data sheet
Robust bearing unit
DE EN FR
Installation manual
Robust bearing unit

Cables and connectors

M12 Connector with cable ,

M12 Connector with cable ,

Preassembled cable set

PROFIBUS DP
Female connector 5-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6011.3211.XXXM

Data sheet
M12 cordset, PUR, socket, 5-pin, B-coded, open end, Profibus
DE EN FR

M12 Connector with cable ,

M12 Connector with cable ,

Preassembled cable set

PROFIBUS DP
Female connector 5-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6011.3311.XXXM

Data sheet
M12 cordset, PUR, socket, 5-pin, B-coded, angled, open end, Profibus
DE EN FR

M12 Connector with cable ,

M12 Connector with cable ,

Preassembled cable set

PROFIBUS DP
Male connector 5-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6011.3411.XXXM

Data sheet
M12 cordset, PUR, male, 5-pin, B-coded, end open, Profibus
DE EN FR

M12 Connector with cable ,

M12 Connector with cable ,

Preassembled cable set

PROFIBUS DP
Male connector 5-pin

Female connector 5-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6011.3432.XXXM

Data sheet
M12 cordset, PUR, socket, 5-pin, B-coded + pin, probibus
DE EN FR

M12 Connector with cable ,

M12 Connector with cable ,

Preassembled cable set

PROFIBUS DP
Male connector 5-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6011.3511.XXXM

Data sheet
M12 cordset, PUR, male, 5-pin, B-coded, angled, open end, Profibus
DE EN FR

M12 Connector with cable ,

M12 Connector with cable ,

Preassembled cable set

PROFIBUS DP
Female connector 5-pin

Male connector 5-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6011.3533.XXXM

Data sheet
M12 cordset, PUR, socket, 5-pin, B-coded, angled + pin, Profibus
DE EN FR

SUB-D Connector with cable ,  Doppelkabel

SUB-D Connector with cable , Doppelkabel

Preassembled cable set

PROFIBUS DP
Female connector 5-pin
& Male connector 5-pin

Male connector 9-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6012.5536.XXXM

Data sheet
Cordset Sub-D and M12 connector, PUR, socket, 9-pin + 2 x M12, B-coded, 5-pin, Profibus
DE EN FR

M12 Connector ,

M12 Connector ,

Field-wireable connector

PROFIBUS DP
Male connector 5-pin
05.BMSWS 8151-8.5

Data sheet
M12 pin, 5-pin, B-coded
DE EN FR

M12 Connector ,

M12 Connector ,

Field-wireable connector

PROFIBUS DP
Male connector 5-pin
05.BMSWS 8251-8.5

Data sheet
M12 pin, angled, 5-pin, B-coded
DE EN FR

M12 Connector ,

M12 Connector ,

Field-wireable connector

PROFIBUS DP
Female connector 5-pin
05.BMWS 8151-8.5

Data sheet
M12 socket, 5-pin, B-coded
DE EN FR

M12 Connector ,

M12 Connector ,

Field-wireable connector

PROFIBUS DP
Female connector 5-pin
05.BMWS 8251-8.5

Data sheet
M12 socket, angled, 5-pin, B-coded
DE EN FR

M12 Connector , Lead-through

M12 Connector , Lead-through

Field-wireable connector

PROFIBUS DP
Female connector 5-pin
05.FKW-FSW45/M12

Data sheet
M12 bushing, 5-pole, B-coded
DE EN FR

M12 Connector , Abschlusswiederstand

M12 Connector , Abschlusswiederstand

Field-wireable connector

PROFIBUS DP
Male connector 5-pin
05.RSS4.5-PDP-TR

Data sheet
M12 pin, terminating resistor, Profibus
DE EN FR

„Do you have technical questions about Kübler encoders or are you looking for individual solutions? We at Application Support are here for you.“

Rainer Grueninger
Application support
Rainer Grueninger
Application Engineer

support@kuebler.com
+49 7720 3903 849

„We will be pleased to give you information about prices and delivery times. We are looking forward to your inquiry.“

Fritz Kübler GmbH
Sales
Fritz Kübler GmbH
Sales Germany

info@kuebler.com
+49 7720 3903 871
+49 7720 21564