Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Strain gauges for pressure and weight electronic
Codix 566
|
|
DMS controller (strain gauges) with totalizer function.
The process controller Codix 566 with totaliser function displays measured values from all common strain-gauge inputs in high resolution. In addition it can monitor and control 2 limit values.These fast displays set new standards when it comes to user friendliness. Their easy-to-read 14-segment LED display, easyto- understand running help texts and a practical quick-start guide eliminate the need to wade through time-consuming full instruction manuals.
With optional analogue output.
| Mechanical | |
|---|---|
| Model | electronic |
| Dimension 1 |
96 x 48 mm | 92 x 45 mm |
| Protection level |
IP65 |
| Working temperature | -20 °C ... +75 °C |
| Weight | 180 g |
(1) Front panel size | Panel cut-out
| Electrical | |
|---|---|
| Power supply |
100...240 (± 10%) V AC 10...30 V DC |
| Signal input |
Empfindlichkeit: 3,3 - 3,0 - 2,0 mV/V Empfindlichkeit: 1,5 - 1,0 mV/V |
| Signal output |
Analog 0...10 V Analog 0...20 mA Analog 2...10 V Analog 4–20 mA 2 x Relais |
User-friendly
Powerful
- Practical quick-start guide for setting the parameters and operating the device
- Help text as running text
- Easy-to-read 14-segment LED, 6-digit display, 14 mm high
- Simple programming via 4 keys on the front
- One front key as well as 2 additional inputs can be programmed for specific applications
- Customer-specific characteristic (linearization) curve via 12 control points for all measurement signal inputs
- MIN/MAX memory function, individually resettable
Powerful
- Sampling rate of 10 readings per second
- Application-specific characteristic curves via
- 12 measurement points
- Manual totaliser function for totalising the measured values. Can be reset separately.
- 2 relay outputs (changeover contacts) for limit monitoring with hysteresis and ON/OFF delay function for current measured or totaliser values
- Analogue output for the current measured value, MIN-value, MAX-value or totalizer value
- Auxiliary sensor power supply 10 V DC / 30 mA for powering 350 Ω bridges
- Inputs and outputs galvanically isolated
- Digital filter (first-order) for smoothing display fluctuation with unstable input signals
- Tare function
