Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Shaft copying systems
Ants LEB02
|
|
Shaft copying system – absolute positioning of the elevator car.
LEB02 is an extremely robust, compact and contactless measuring system. With a resolution of 1 mm and a travel speed of up to 8 m/s, absolute position values of the elevator car are determined slip-free via a contactless measuring principle. Additional components such as magnetic switches become superfluous.
The simple mounting in particular reduces installation times and thus contributes to lowering overall costs.
| Mechanical | |
|---|---|
| Measuring system | Shaft copying systems |
| Measuring length |
392 m |
| Speed |
8 m/s |
| Dimension | 126 mm x 55 mm x 37 mm |
| Working temperature | -10 °C ... +70 °C |
| Protection level |
IP54 |
| Weight | 500 g |
| Electrical | |
|---|---|
| Resolution max. |
0,25 mm |
| Accuracy |
±1 mm |
| Interfaces |
CANopen-Lift RS485 SSI, gray |
| Power supply |
10...30 V DC |
Precise position feedback
The sensor system provides absolute position values. No reference run necessary after power failure.
100 % slip-free
Mounting on, next to or under the elevator car always provides direct position feedback without the influence of possible slippage of the suspension means.
Conveyor heights up to 392 m
With a resolution of 1 mm, a travel speed of up to 8 m/s and a maximum code tape length of 392 m the measuring system can also be used for high-rise installations.
Maximum compactness
With its compactness, the sensor is not only easy to mount, but can also be integrated into the tightest installation spaces. Even in glass elevators, it blends in very well with the overall appearance of the elevator system.
Accessories
EMC shield terminal
For an EMC-compliant installation of the encoder cable,• top-hat rail mounting
• Shield diameter
• Weight approx. 7,4 g
• Clamp (spring steel, galvanised)
• Foot (spring steel)
| 8.0000.4G06.0312 |
Locking element
The locking element is used for fastening the slides in the Ants LEB02 and Ants LES02 sensors.The locking element is to be replaced in case of deformations or damages.
Scope of delivery:
1 x locking element
1 x oval head screw M3.5 x 12
| 8.LEX.ZB.0013 |
