Draw-wire encoders
A50
|
|
Draw-wire encoder - the compact one for the highest requirements.
The draw-wire mechanics A50 boast both a compact design and high dynamics.The draw-wire mechanics may be equipped with encoders with an analog, incremental or absolute output. The maximum measuring length is 1.25 m.
Mechanical | |
---|---|
Measuring system | Draw-wire encoders |
Measuring length |
0.25 m 0.5 m 1,25 m |
Speed |
10 m/s |
Dimension | 50 mm x 50 mm x 99 mm |
Working temperature | -20 °C ... +85 °C |
Protection level |
IP65 |
Weight | 330 g |
Electrical | |
---|---|
max. linearity |
±0,02 % |
Interfaces |
Analog 0...10 V Analog 4–20 mA CANopen Gegentakt TTL / RS422 SAE J1939 Potentiometer output SSI, binär BiSS IO-Link |
Power supply |
12...30 V DC |
Robust
- The titanium-anodized aluminum housing and the stainless steel wires allow for using the mechanics even in harsh conditions.
- Wear-free wire exit thanks to special plain bearing guide.
- Various wire types and wire fastenings.
- High traverse speed, up to 10 m/s.
- High acceleration, up to 300 m/s².
- Quick fastening by means of 2 screws.
- Various connection possibilities available.
- Scalable analog output with limit switch function.
Accessories
Guide pulley
With guide pulleys, linear movements can also be directed around obstacles. This not only increases their flexibility but can also compensate for installation tolerances. Idler pulleys can also act to clean off dirt and break ice.Technical data:
- Installation angle (anodized aluminum)
- Guide pulley (plastic POM)
- Ball bearing (Type 696-2R5)
- 2 x countersunk screws for side fixing
- 2 x Allen screws for fixing on a flat surface
8.0000.7000.0045 |
Extension cable steel
With extension cables, the actual measuring range can be used without any loss of resolution. We offer numerous extension cables in our portfolio for this purpose.5 m | 8.0000.7000.0048 |
0,5 m | 8.0000.7000.0051 |
1 m | 8.0000.7000.0052 |
6,5 m | 8.0000.7000.0053 |
3 m | 8.0000.7000.0055 |